Can I use 60 instead of 65 tires?

Physically, yes they will fit. It is recommended to stay within 3% of the original tire size on the car though. The size you have is 3.09% smaller, so not recommended. You could go with 205/60-15 though if you can get a better deal on that size.

What do the 3 sets of numbers on a tire mean?

B: TIRE WIDTH The three-digit number following the letter is the tire’s width (from side to side, looking at the tire head on) in millimeters. This may also be referred to as the section width. In this example, the aspect ratio is 65, meaning the sidewall is 65 percent as high as the tire is wide.

What’s the difference between 60 and 65 on tires?

The 65% aspect ratio (as in 235/65/17), compared to 60%, adds almost 12 mm (1/2″) to the radius of the tire (0.65-0.60)*(235mm)=11.75mm.

Which tire is wider a 65 or 70?

The series number in a tire-numbering system refers to the aspect ratio of the tire’s sidewall height to its width. A series 65 tire’s height is 65 percent of its width, a series 70 tire’s height is 70 percent of its width and so on. These differences in height affect both performance and safety issues while driving.

You might be interested:  What Does The Red Number Mean On Messenger?

Can I use 235 tires instead of 225?

Are 225 and 235 Tires Interchangeable? Yes, they are. However, this is only possible if your car’s rims can accept the larger millimeter.

Can I use 225 tires instead of 215?

Yes, you can. But only if the rims on your car can accommodate tires that are 10-20 millimeters wider. Bear in mind that wider wheels require more fuel due to their increased rolling resistance. Again, wider tires are more costly than narrower ones because they need more rubber during construction.

Can wrong size tires damage car?

Unfortunately, altering the tire size of a vehicle without thorough and careful consideration is a decision that can really bite. Fitting the wrong tire size can cause damage to a vehicle, and is a real safety hazard as well.

How much taller is a 70 tire than a 60?

The series is a % of the sidewall compaired to the width. A 70 series tire sidewall height is 70 % of the tires tread width, a 60 series tire has a sidewall hight of 60% of the tires tread width.

What is the 60 in tire size?

60 is the two-figure aspect ratio. This percentage compares the tire’s section height with the tire’s section width. For example, this aspect ratio of 60 means that the tire’s section height is 60% of the tire’s section width. R indicates the construction used within the tires casing.

Can I use 55 tires instead of 60?

Yes the wheel/tire combo has an overall diameter/circumference that should be maintained with 3% (+/-) the original spec. When you plus size wheelsthe aspect ratio (height of the tire) decreases to compensateand maintain the orig diameter/circumference.

You might be interested:  Often asked: What Does The Number 5 Mean In Angel Numbers?

What is the difference between a 70 and 75 tire?

I think the 75 series tire is roughly 1″ taller than the 70 series. so 1/2″ more sidewall not a lot of difference. The 75 definately “looks” better and might even get ya better mileage as you’re not turning as fast.

What does 65 mean on a tire?

“65” in the sequence is the aspect ratio of the tire. The aspect ratio is a percentage, and it tells you the ratio of the tire’s height to its width. In this example, the aspect ratio number “65” means that the tire’s height is 65 percent of its width.

Are wider tires better?

Larger tires improve handling and cornering, due to wider tread faces and stiffer sidewalls. Wider tires may also increase acceleration, especially in very powerful vehicles such as muscle cars. Larger wheels with lower profile tires are sometimes aesthetically desirable.